z

Search our shop

    z

    How to Remove Broken Lightning Cable From iPhone/iPad?

    • 4 min read

    Being an iPhone user, you must have noticed how the lightning cable is not as sturdy as the old connector. You are probably here because somehow, the lightning cable connected to your iPhone or iPad snapped off inside the charging port. And now It seems impossible to remove the broken piece out of the slot – Well, it’s not

    broken lightning cable

    Why Do Lightning Cables Break?

    If your iPhone charger broke off insidethe charging port, it is because the cable was facing rough usage for a while. This happens due to excessive bending, squashing, and tension. Like any product, lightning cables also wear off after a useful life. However, recently the lightning cables have become flimsier and more fragile than the old ones. 

    Every day abuse and wear tear cause a lightning cable to break off eventually. Yet, if you have to frequently buy a new lightning cable for your iPhone (because it frays or just stops working), then the issue lies with the quality of the lightning cable. Such lightning connectors lack durable and long-lasting material. Thus, poor quality cables are more susceptible to breakage even with normal usage. 

    broken lightning cable

    To avoid the misfortune and hassle of trying to remove the charger stuck in the iPhone, invest in a good quality lightning connector. Make sure your lightning cable is composed of durable and high-quality material. With a good quality cable, you will never have to face the issue of a lightning cable tip stuck in the iPhone. Such connectors are specially designed to withstand excessive bending and rough usage.

    To conclude, get a lightning cable that will not bend or twist no matter how you treat it, making your life more convenient. It will also save you from the pain of trying to pull out stuck off broken chargers. Try using Syncwire lightning cable. It is made up of a nylon braided cover with bullet proof fibre, giving the lightning cable a 30,000+ bend lifetime. So, you will never have to pick out a broken charger piece from your iPhone!

    syncwire lightning cable

    How to Remove A Broken Lightning Cable From An iPhone/iPad?

    Here are some quick and easy ways to pull a broken plug out of an iPhone/iPad’s terribly small charging port. 

    1. Using Super Glow

    Who knew super glue could be so useful? 

    Step 1 – Get A Screwdriver and Super Glue 

    Get a small screwdriver and make sure that its head is small enough to fit in the charging port of an iPhone or iPad. 

    Step 2 – Apply Glue

    Apply a small amount of super glue to the tip of the screwdriver. Now insert the screwdriver into the port and hold it firmly against the broken plug. The head of the screwdriver should not touch the sidewalls of the socket. 

    Step 3 – Pull Out

    Wait for 30 to 60 seconds for the glue to set in place. Carefully pull out the broken piece without applying much force. 

    Note: Do not wait for the glue to dry off completely. 

    1. Using Tweezers

    The power of tweezers goes far beyond plucking hair. Use them to pull any tiny object!

    using twizzer to remove broken lightning cable

    Step 1 – Get Tweezers

    Get quizzes with small pinching ends. Since the charging hole on the iPhone/iPad is very small, large-sized tweezers will not help.

    Step 2 – Tweak and Hold

    Try to hold the stock of the broken piece with the ends of the tweezer. Keep tweaking and trying to adjust broken for the tweezers to pinch. 

    Step 3 – Pull Out

    Once you get a hold of the piece, carefully pull it out. 

    1. Using Safety Pin and Blackhead Pin

    Safety pins are the perfect tool to fix charging port issues.

    Step 1 – Get a Safety Pin

    Safety pins are super thin and handy. Use a safety pin to move the broken piece at an

    angle. 

    Step 2 – Use Blackhead Pin

    Hold the broken piece with the safety pin and try pulling it with a blackhead pin. 

    Step 3 – Pull Out 

    Keep trying to pull out the broken charger piece until you have removed it. 

    1. Using Seam Ripper

    If you don’t have a seam ripper, get one because it is very useful – to open buttonholes and unclog the charging port. 

    Using Seam Ripper

    Step 1 – Use a Seam Ripper 

    Get a seam ripper in the smallest size possible because the charging port of an iPhone/iPad has a very small area. 

    Step 2 – Insert the Seam Ripper

    Insert the seam ripper inside the charging port and move it around to remove the broken piece of the charger. Keep trying and be careful not to damage the charging pins. 

    Step 3 – Remove the Charger Stuck in iPhone

    Eventually, you will be able to remove the charger broke in the iPhone.

    1. Using Nail Clippers

    Nail clippers are the best way to pull the piece that is sticking out of the charger.

    Step 1 – Get Nail Clippers

    Get small nail clippers as they can easily grab any piece sticking out of the charger. 

    Step 2 – Grab the Broken Piece

    Clip the edge that is sticking out of the charger, and pull it out. 

    Step 3 – Pull the Piece Out

    Keep grabbing and pulling out the piece until you remove it from the port. 

    Conclusion

    An old or cheap quality charging cable can break off and get stuck in your iPhone/iPad anywhere, anytime. It is important to invest in a certified and high-quality lightning cable that is sturdy and reliable – it will truly enhance your iPhone experience.

    Leave a comment (all fields required)

    Comments will be approved before showing up.
    ×
    Welcome Newcomer